7 Best Welder For Exhaust Pipe that you can't afford to miss
Welders

Best Welder for Exhaust Pipe – Reviews & Comparison Table

If you are in find of a welder, which is best for the exhaust pipe, then congratulates because you are on the most relatable post. We analyzed many welders for exhaust pipe according to the demands of our honorable clients and shortlisted a few proficient welders.

Utilizing the agreeable welder and doing the welding own for the exhaust pipe aid one lot in saving money. However, you can easily make the process of welding exhaust pipes simple by using one of our recommended machines at an affordable price. The method of welding is quite smooth only if you follow the proper set of accurate instructions and give full attention. Also, one should know about the basic knowledge of the working of the welder than it can use it efficiently. It is useful if you consider one crucial thing while welding that to be a stay away from vehicles to avoid despised circumstances due to the flammable stuff.

We have reviewed the top 7 Best Welders for Exhaust Pipe, with all their features and details. All the welders who have mentioned below are especially the best for welding exhaust pipes since they can weld several thicknesses of metals. Therefore, after reading the comprehend reviews, you can choose a suitable one for you.

Top 7 Welders for Exhaust Pipe – Comparison Chart

ProductsDetailsPrice
Hobart 500559
Handler 140
  • Wire feed speed range: 50 - 740 IPM
  • Amperage output: 25–140
  • 20% duty cycle @ 90 Amps
Lotos 200ACDC Welder
  • Dual Voltage Input
  • Power efficiency: 80%
  • OUTPUT: Maximum 200AMP
Hobart 500554001
Handler 190
  • 25 to 190 output amperage
  • 30% duty cycle @ 130 Amps
  • Operates on 230V power
SUNGOLDPOWER 200Amp
  • Multifunction (Dual Voltage)
  • Wire feed speed range:1.5~16m/min
  • Rated Duty Cycle(%): 60
Miller Electric, 907614
  • Rated Output 150A @ 21VDC
  • Duty Cycle 40 %
  • Output Range 30 to 230A DC
Lincoln Electric
Weld Pak 140 HD
  • Power Source: Dc 120v
  • Voltage:110 volts
  • 40% duty cycle
Lincoln Electric
Power 140C welder
  • Duty Cycle Percentage: 20%
  • Maximum Voltage: 120 Volts
  • Output Amperage: 140 Amps

Best Welder For Exhaust Pipe Reviews

1. Hobart 500559 Handler 140 MIG Welder


Hobart 500559 Handler 140 MIG WelderThe developers can never compromise the reliability and quality of the product. The Handler 140 MIG Welder is one of the best tools, also high in demand. Its design is very adaptable, which makes it ideal for the welding requirements. You can easily use this tool for mending the household stuff, farm projects, working on automotive, and various art. Moreover, the equipment appears with a tapped voltage control selector that can be modified in five positions. In this way, it gives welders a great tune along its arc that enables you to do smooth arc covering.

There is a gun that is 10ft long that eases the comfort level with 10 feet clamped working cable for the users. Also, the hub spool can adjust four to eight inches spool, and the wire feed speed range is approximately from forty to seven hundred IPM and 50- 740 IPM at no load.

Furthermore, the stable and tubular polarity can effortlessly be altered along with the rawer user adjustment interface. The tool gives you beneficial services in a wide range, such as it helps you on the farm, ranch, home, bracket grill, firewood rack projects, and many more.

Overall, this versatile tool gives a stunning performance for the welding process. Also, the lightweight and easy use of this tool make it a handy device for the people who are in search of ideal welding.

 

Pros
  • Affordable product
  • Easy to use
  • Lightweight
Cons
  • Sometimes, the pressure regulator works slow.

2. Lotos 200ACDC Welder for Exhaust


Lotos 200ACDC Welder for ExhaustLotos 200ACDC is a welding machine that helps to operate on a dual voltage machine. The device is sturdy in use and provides the user number of controls to set the welding machine rigorously. The most prominent thing about this tool is that the tool is exceptionally incredible, which aids to work effectively.

Moreover, the tool features a square wave inverter technology that aids in smoothing the working of the device. Hence, you can work smoothly while welding process of exhaust pipes and elegant aluminum. In this way, the machine permits the welder to switch from 110V to 220V using the adapter plug rapidly. Hence, it generates AC/DC 200 amperage for stick and TIG welding. You can smoothly take the guidance from it by following the natural construction. Also, it makes sure that the user has an excellent professional-level performance.

The device can work on 110V 50/60 Hz energy, and 220V 50/60 Hz power, effortlessly. It is stable to use and gives you the privilege to make a deep weld pool, smooth arc, and fantastic welding shapes. So, one can get it with confidence as the developer ensure you about it’s the suitability of welding stainless steel, mild steel, aluminum, and so many other metals.

The Lotos 200ACDC is a versatile machine that offers you precise performance for welding. As the tool is easy to handle and a cooperative one at an affordable cost so one must try it. Besides all these, the advanced cooling system, automatic dual voltage, and other efficient factors make this deal agreeable.

 

Pros
  • Warrant by the company
  • It has HF start hand torch control
  • It is ideal for mild welding steel, and stainless steel, etc.
  • Gives the option of Deep weld pool
Cons
  • There should be an improvement in argon regulators
  • Sometimes controls perhaps confusing for beginners.

3. Hobart 500554001 Handler 190 with SpoolRunner 100


Hobart 500554001 Handler 190 with SpoolRunner 100Now you shouldn’t worry about aluminum jobs because of Hobart 190 that appears with a spool gun. You can plug in the spool Runner hundred gun to avoid the problems that probably happens with aluminum with welding. Once you attach the spool gun, then there will be no need for any spare adapter or control box. The product has proved one of the powerful devices due to its proficiency. Amazingly, there is portable wire-feed flux-cored as well as MIG welding device made to weld stainless steel, mild steel, flux core, and aluminum efficiently.

Moreover, the product gives you a powerful and professional result that any individual desires. It works on the only 230V power at fast speed. Also, the tool gives you a 30℅ duty cycle at 130A and opens the circuit voltage at 31. There are seven voltage selections, and improved magnetics and infinite wire feed speed controls make more natural excellent control of output parameters to improve arc working with less spatter.

The tool is a phenomenon; it helps in several projects such as in the household, exhaust system, and also in the auto body fabrication employing extra capacity. The fantastic features, such as seven output voltage settings and the dual position rapid replace the drive rolls, prepares this Handler a versatile tool.

The Hobart 500554001 Handler 190 is a handy tool as it offers one so many features that one hardly find in any machine. Additionally, it supports you to do a wide range of projects in less capacity, also permits the user to weld 24 gauge to 5/16” steel in once

 

Pros
  • Seven Voltage Selection
  • Powerful and professional results
  • Very smooth to use
  • High quality and reliability
Cons
  • Voltage controls need to be better

4. The SUNGOLDPOWER 200Amp Welder


The SUNGOLDPOWER 200Amp WelderThe SUNGOlDPOWER welder has designed much, a lightweight device that helps in each small and big industrial tasks. With the help of this product, you can adjust the welding current and wire feed speed according to your requirements. The machine has contained stunning features that make the product an ideal welder for the folks, even for varying thicknesses of exhaust pipes. Due to its high-quality circuit board, and transformed one can use it smoothly every time.

Moreover, the tool is adequate for welding so many stuff such as stainless steel, aluminum, carbon steel, mild steel, and so many other metals. Also, it gives you professional output on 110V & 220V. But the fact is that this machine has not spool gun even it provides the best competition to his rivals. You can find their selector for MIG gun, which helps to switch arms to run quickly and easily. The best thing regards this machine is that it is multifunction welders. The reason is that with 110V and 220V dual voltage DC IGVT inverter welder, it also possesses MIG/MAG/ARC/MMA multifunction welders.

The machine is excellent; if you want to use it must assure the setup and put down the IPM, amp, and voltage on the setting. If you don’t know the number of these settings, one will have a tough time utilizing this welder. The product doesn’t set up for 21lb spool, but you can make one for yourself.

The product is excellent to deal at such a low cost, use in every small or big task. As mentioned above, it has a high quality of circuit board and transformer so that it is straightforward to use it for anyone. With its attractive features and high capacity, you can make your work efficient.

 

Pros
  • Gasless fluxed-cored welding
  • Flexible wire feed speed and welding current
  • Multifunction welder
Cons
  • No spool gun included.

5. Miller Electric, 907614


Miller Electric 120 240VACMiller Electric gives its users the capability to fix the wire feed speed and the welding current that make it unique. Due to its essence, it became one of the famous machines among welder users. The product designed to give the operators total control. Moreover, the tool appears with the latest format ground cable and aluminum wire feeder to deliver long-time services.

Furthermore, the device also launches developed Auto SetTM, Quick SelectTM Drive Roll, Thermal overloaded, Smooth Start TM, and other phases. With this tool, one can weld a vast collection of metal with different thicknesses, from mild steel to carbon, aluminum steel, and stainless steel. The gauge for aluminum material is 24 for 3/8 inches, and for stainless steel, it is 24 for ¼ inches. It also offers you to use a broad spectrum of welding wire, such as from 0.023 inches fi 0.0035 inches for solid steel, whereas 0.030 to 0.045 inches for the flux core wire. You can quickly attack the welder to your good outlet with a voltage of 120.

The Miller Electric is an adequate welder, and it comes with ten feet M-10 MIG gun and with ten feet cable sample spool of 0.030 inches. The product is good enough to as it offers you high welding for the exhaust pipe. Due to its lightweight, you can carry it from one place to another easily.

 

Pros
  • Works on 110V at 130A.
  • Lightweight
  •  weld up to 1/2 “ on 220V
Cons
  • Expensive
  • Cheap ground clamp.

6. Lincoln Electric Weld Pak 140 HD Wire-Feed Welder K2514-1


Lincoln Electric Weld Pak 140 HD Wire-Feed Welder K2514-1Lincoln Electric Weld Pak 140 has deliberately made for the casual operators; it is light in weight and easy to run. The product, along with flux-cored wires, is convenient for the operators. With the aid of this feature, there is no need to use any shielding gas. Therefore, Lincoln welder is one of the useful welders.

Moreover, the tool offers to its operator 20% of the duty cycle at only 70A. So, you can use it continuously for two minutes at 70 amps without any disturbance, but before that, you have to give an 8 minutes rest. Also, the tool appears along with an eight-foot power cord, a gas hose, and an eight-foot clamp cable. It allows you to weld one over eight thick metal. Besides all these, the product gives you the facility to adjust the wire feed speed.

Furthermore, this excellent machine is ideal for light home projects, minor auto body improvement, and farm repair. There is a chart in the door that is precise enough; you can take guidance from this.

Overall, the Lincoln Electric Weld Pak 140 HD Wire-Feed Welder is very helpful for occasional use. Like other Welders, it is also light in weight and easy to use with a 20% duty cycle feature. With such a fantastic product, you can adjust the wire speed feed, so it is quite a flexible tool.

 

Pros
  • It is compact.
  • Affordable to buy.
  • Give consistent arc
  • Versatility
Cons
  • Sometimes makes problem in the circuit issue.
  • Only 20℅ duty cycle machine

7. Lincoln Electric Power 140C 120V MIG Welder


lincoln Electric Power 140C 120V MIG Welder 140AThe Lincoln Electric Power brings with it so many efficient features that help operators to get professional finishing on their projects. The tool has made up of excellent quality materials. In this way, it offers you to use this product for so long due to its high-quality products and desirable features. Every user desire a reliable, also portable welder that one smoothly carries from one site to other than it perfect to trust.

Furthermore, the weight of the product is only 70 pounds, this easy to carry and use with 14 by 10.5 by 18.6 inches measurements. Although the machine is compact, it still gives you enormous support. The duty cycle of the machine is about 20% at ninety Amps small while consuming only 120V. Besides all, the device can help a user to fine-tune the arc according to operator requirements as it has sufficient voltage control.

The machine uses in a broad range of welding processes, such as in thin aluminum, steel welding, and automotive works, etc. With this proficient device, you can resolve your all welding matters, which can cause of money loss.

The Lincoln Electric Power 140A MIG Welder is a phenomenal tiny machine that may aid you as not only professional but also to beginners. It can weld up 5/16” steel with the use of self-shielded Lincoln Inner shield cables. Hence, with its number of advantages, such a fantastic deal to do.

 

Pros
  • Warranty of three years.
  • Weld up to 5/16” steel
  • Portable
Cons
  • Sometimes, the 20 cubic foot bottles run out fast.

 

Leave a Comment

0 Shares
Tweet
Share
Pin
Share